ChassisElectricalFrontRearBodyInteriorNotes
Body - Door - Weather Seal

 

These are photos and comments from other builders about there door weather sealing methods.
Luis A. Yanez 

Outer weatherstrip in full lengths

 The weather strip is cut in half, you must cut off the weatherstrip part from the metal frame.

It still leaves some metal to pop rivet to the door itself. I could not find part numbers on the weatherstrips,

Once done, it seems to fit very well.

 

 

Dale Van Blokland

To install the weather stripping on the outside of the window, I pop riveted it to the door. I then used 1 1/2 aluminum carpet trim cut to shape to cover the rivets. I still need to paint the strips and glue them to the door but it will ad a nice finish.

 

 

From the CRP manual
This outer door glass seal was taken from a 93 LeBaron and mounted to the door. Trim and slice the inner lip and screw it to the lip on the inside of the door.

 

This entire web site is Copyright © 2002- www.lambolounge.com by Ron Fletcher. All rights reserved.

Although my information comes from various builders and sources, if you want any information contact me. The photographs used on this site are used with permission, if you want to use any, contact them through the various links on this site. I did and you can see the results!