I am posting the following ad's to help other builders out, I am not charging anyone for this space... I think we have all paid enough. If you have something that you would like to sell please drop me a line, send me your photos and I will post it to this page. fletch

4/11/05

Ron, I am at the unfortunate juncture of being required to sell my project. It is presently listed on eBay. I have a replica chassis, Murci rims, air lift system, and complete BMW V12 engine. The engine should be listed later today.

Wheels -
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?
ViewItem&rd=1,1&item=7967375109&sspagename=STRK%3AMESE%3AIT

Chassis -
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1,1&item=4542530956&sspagename=STRK%3AMESE%3AIT

Air Lift -
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1,1&item=7967506985&sspagename=STRK%3AMESE%3AIT

My engine will be listed later today. I also have a 99 BMW M3 listed if anybody is interested - http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1,1&item=4542360130&sspagename=STRK%3AMESE%3AIT

Thanks,
Greg

1/31/05 3800 supercharge

I'm selling a 3800 s/c out of 97 grand prix with 60k miles on it, i bought this engine out e bay, since i was not ready for it at the moment i received, i just put it away without check on it, figuring i better let it all wrap until the time come, well now i was ready for it, went for it and find out the super charger is mission, call the sale person and he tell it was nothing he can do, since it has being a year of my purchases (i totally understand, my fault, sure check it back then), on my search for the missing part came across of a completed engine, which i bought, so now i have that other one for sale, it has:
fly well, p/s pump, water pump, coils pkg., intake, tensor pooling, all the brakers for the rest of assery, every thing but alt and a/c comp, i don't have use for it so make me an offer, the engine still on the cray the way it came and ready for delivery, i have all the recipe and paper for it, it came from LKQ mid America, like i say I'm open to a reasonable offer
thanks for looking.
Flo Rodriguez565@aol.com

Ron Boudreau - 3/2/04

Radiators in two sizes. 12 ½ X 14 fit D&R air ducts. 15x 14 fit ADL and others. Radiators are 4 rows and made from copper with 1 ½ inlets. Bleeder on top& bottom. $600 / pair plus shipping.

Shaune 9/19/03

Email me at DushauneEvans@aol.com

Lamborghini Replica or Ferrari Replica Complete Rear suspension. This rear will work with any replica that is based on an 84 thru 88 Pontiac Fiero chassis. Stretched or Non-Stretched. This will give the car the right height eliminates bump steer problems, and give the car the correct feel. Have you seen replicas that sit too high or bounce on the road? More than anything if you have a replica that has a suspension that cannot be aligned and will not drive straight at high speeds this is the answer. This completed suspension was nearly $2000 dollars new. Bid with confidence you will not be disappointed. This custom suspension was made by Held Motor Sports the leader in Fiero Suspensions for replicas and kits. I have links to their site for detailed information on each component. Please note that this suspension will work with any year Fiero chassis.
http://www.heldmotorsports.com/bump.htm
http://www.heldmotorsports.com/heldk.htm
http://www.heldmotorsports.com/88acc.htm
http://www.heldmotorsports.com/88RearLinks.html

Ron Boudreau - 3/28/03

Audi 5000 Shifter

Made form polished 303 Stainless Steel and Stainless Hardware.
$300.00 plus $10.00 for packing and shipping UPS ground in the US.
Contact me: ronboud@comcast.net

1/28/02 Odd Jaegtnes (Oddman) oddman@telia.com

I have Pay Pal, If you have any questions on these items please email me.

Steering Column Controls
I get my hands of some used controls, so am selling the extra... I want $300.00 for it.

I have made an engine lid grill for CRP roadster and wonder if any is interested in Pre Cut parts.
The grill can be cut in aluminum, steel or stainless steel T=1.5. I made mine in stainless, but it's little to hard to bend and work with, my recommendation is steel, easy to bend, shape and weld.

Cost for cutting is 90.00$ + shipping. Email me if you have any questions.