| |
|
|
|
|
|
|
| |
|
|
|||||||
|
|||||||||
| Chassis - Electrical - Fuse Block |
| Endre (Andy) Bujtas |
| Central Electrical System Wires, wires everywhere - come into my parlor said the spider to the fly. As you can see, wiring a car can be a real mess. It is not difficult, but it is definitely tedious and painstaking work. I've replace the Fiero wiring with an 18-circuit unit from Painless. This is easier than trying to figure-out what wire goes where in the Fiero mess. Yes, the Fiero harness was really a mess! This way, I can layout the wiring my own way and make my own (more modular) harnesses.  |
|
I'm using a rear Painless 8 circuit wiring block in the rear as suggested by Andy, it really works out well to separate engine compartment and front wiring blocks. One comment about the Painless.. the relays wouldn't work correctly. I kept thinking it was something in MY wiring, when in fact the painless wiring on the back was incorrectly done. It took me 1/2 a day to identify the problem and rewire the block correctly. WHAT A PAIN the painless was.. |
 |
 |
 |
| LINKS: |
| Painless Wiring |
 |
This entire Website
is copyright © 2002-2005 by Ron
Fletcher. All rights reserved. |
Although my information
comes from various builders and sources, if you want any information contact
me. The photographs used on this site are used with permission, if you
want to use any, contact them through the various links on this site.
I did and you can see the results! |