| |
|
|
|
|
|
|
| |
|
|
|||||||
|
|||||||||
| Chassis - Fiero Firewall |
|
I decided to go with fiberglassing the opening in the firewall for the pulley clearance. I used thin card board to form the clearance around the pully, about 1 inch clearance is all that is needed. |
 |
 |
| Two layers of bi-directional made it very solid. |
 |
Here's a pic of the cutout to clear the Alt
|
This is the right side of the AC clearance cutout
|
 |
This entire Website
is copyright © 2002-2005 by Ron
Fletcher. All rights reserved. |
Although my information
comes from various builders and sources, if you want any information contact
me. The photographs used on this site are used with permission, if you
want to use any, contact them through the various links on this site.
I did and you can see the results! |
