Lambo Lounge - Diablo Kit Car

Chassis - Tube Chassis Frames

Back to Tubular Frame Memu

North American Exotic Replica Car

TUBE CHASSIS FOR DIABLO REPLICA CARS

Our tube chassis is a very strong and ridged design utilizing square, rectangular and round tubing. This chassis is designed for building Coupe or Roadster model Diablo replica cars. It has been designed to handle high horse power engine mounted longitudinal with Porsche style transaxles. It can be purchased with or without the suspension and brake package. The suspension package includes Corvette front spindles with heavy duty hubs that use a 5 on 4-3/4 in. bolt pattern. It also includes high quality multi adjustable coil-over shocks on all four wheels. You have a choice of 12 in. or 13 in. Corvette rotors and brake calipers. Please note: 12 in. brakes rotors will accept 17 in. or 18 in. wheels but 13 in. brakes rotors will only accept 18 in. wheels. The chassis is professionally painted in powder coat paint in a variety of color choices.

EXACT REPLICA DIABLO CHASSIS

Our EXACT REPLICA DIABLO CHASSIS is made piece by piece to match the original chassis. This chassis is desihned for building Coupe or Roadster model Diablo replica cars. It will handle very high horse power engine including the V-12 engines mounted longitudinal with Porsche style transaxles. It can be purchased with or without the suspension and brake package. The suspension package includes aluminum front spindles with heavy duty hubs that use a 5 on 4-3/4 in. bolt pattern. It includes high quality multi adjustable coil-over shocks on all four wheels. You have a choice of 12 in. or 13 in. cross-drilled rotors and dual piston brake calipers. Please note: 12 in. brakes rotors will accept 17 in. or 18 in. wheels but 13 in. brakes rotors will only accept 18 in. wheels. The chassis is professionally painted in powder coat paint in a variety of color choices.

I talked to Ken Esler, it was great to see some new products that brought to the show for us to see . This is there Exact Replica Diablo Chassis, made piece by piece to match the original chassis. You can by the chassis or the prints, and build it yourself.

The chassis is designed for building Coupe or Roadster model Diablo replica cars. It will handle very high horse power engines including a V-12 mounted longitudinally with Porsche style trans axles.

The Suspension package includes exact replica control arms and the original Diablo suspension geometry. It is equipped with aluminum front spindles with heavy-duty hubs that use a 5 on 4-3/4" bolt pattern that is set up for a two or four-wheel drive chassis. It includes high quality adjustable coil-over shocks on all four wheels with two on each side on the rear, the same as the original Diablo chassis.

You have a choice of 12" or 13" cross-drilled, vented rotors and dual piston brake calipers.

Andy Bujtas wrote me with this about the NAERC chassis:

At the Knotts show I got a good look at the NAERC chassis. It is a very nice piece of work. However, in examining the NAERC chassis I noticed that something was missing: the seat mounting bolts. Therefore, I'm submitting a suggested method of installing them to the NAERC chassis. The method can be applied to a completed chassis as well as one that will be fabricated by the builder. The suggested method begins at the stage the chassis was presented at the show - that is, complete with the floor plan already installed. It is also based upon using the Fiero seat rail as a starting point, but can also be adopted to any seat rail. This also assumes that the seat mounts have already been completed. Click here for more details

In the left side engine compartment sit this air compressor and reserve tank

Quick lift Air Ride front suspension with ride height control

Although my information comes from various builders and sources, if you want any information contact me. The photographs used on this site are used with permission, if you want to use any, contact them through the various links on this site. I did and you can see the results!