| |
|
|
|
|
|
|
| |
|
|
|||||||
|
|||||||||
| Front - Body Problems |
|
This is the front of my CRP body and bumper, I am having a
warping problem in the front, where the body mounts to the bumper |
||
 |
 |
 |
| I had to build up the front trunk piece with fiber glass then I sanded off the bottom to make it flush, now I have to build up the bowing area under the headlights. | |
 |
 |
| I will need to added about a ½ of fiber glass to the bottom
of the body in front of the headlights, and I will need to sand down the
front warping part of the headlight area to make the body look correct. |
|
 |
 |
Rick Page sent me this photo of his body to illustrate that not all CRP bodies have a warping problem.
|
 |
This entire Website
is copyright © 2002-2005 by Ron
Fletcher. All rights reserved. |
Although my information
comes from various builders and sources, if you want any information contact
me. The photographs used on this site are used with permission, if you
want to use any, contact them through the various links on this site.
I did and you can see the results! |
