| |
|
|
|
|
|
|
| |
|
|
|||||||
|
|||||||||
| Interior - Door - Handle |
| A real Lamborghini These are a few Lamborghini door handles - photos by Keith's Billanti | |
 |
 |
 |
|
|
This is a shot of the OEM inner door handles. I bought 3 as all Diablo's use one of these handles on the drivers door sill to open the engine lid. They are about as simple as 2 small pieces of plastic can be but cost
$85 CDN each. |
 |
|
I drilled a hole through the door frame and welded a 1/4" bolt that I would fasten an L bracket to. I bondoed and glassed this bracket in place to the door panel. This allowed a secure connection from the panel to the door frame to take the stress of pulling the door closed. I fabricated a bracket that was bolted to the door opener and the cable connection. The bicycle cable was wire tied to the bracket and the cable was fastened to the handle. There is enough slack in the cable that the door panel can be lifted off the door and removed if necessary. |
 |
 |
 |
 |
 |
 |
This entire Website
is copyright © 2002-2005 by Ron
Fletcher. All rights reserved. |
Although my information
comes from various builders and sources, if you want any information contact
me. The photographs used on this site are used with permission, if you
want to use any, contact them through the various links on this site.
I did and you can see the results! |