| |
|
|
|
|
|
|
| |
|
|
|||||||
|
|||||||||
| Interior - Door - Speaker |
| These are photos and comments from other builders about there installation methods. |
|
To cover the speakers on the inside, I had a suggestion from a viewer to use a cool whip container and velcro to fasten to the inner door panel. Because I needed access through the speaker opening to bolt the panel to the frame, I could not permanently fasten the speaker cover. Once the panel is bolted in place, (be sure to put the cover in the door first), it was simply pulled into place and the velcro secured it in place. It was necessary to notch the back edge to clear the cable. |
|
 |
 |
 |
 |
 |
|
Once the panel was fastened, the door was put in place, shock connected, speaker cover put in place and speakers added. |
|
 |
|
 |
This entire Website
is copyright © 2002-2005 by Ron
Fletcher. All rights reserved. |
Although my information
comes from various builders and sources, if you want any information contact
me. The photographs used on this site are used with permission, if you
want to use any, contact them through the various links on this site.
I did and you can see the results! |
