| |
|
|
|
|
|
|
| |
|
|
|||||||
|
|||||||||
| Interior - Equipment - Stereo - Amp |
| A real Lamborghini |
 |
 |
 |
| These are photos and comments from other builders about there installation methods. |
|
I reworked the amp to move the fuse closer to the battery and rerouted
the connections to clean it up a little. I also made cardboard templates
for the top and sides routed the rear speaker wires, antenna wires through
a flexible tube and fastened to wheel well. I used padded clips to fasten
the wire loom with mirror controls, speaker wires, window controls and
door solenoids to the front. I placed the Alpine AMP where it would be
fastened to the trunk braces. I installed the metal cover over the braces
and then used an ABS sheet that I had bought that has a carbon fiber imprint.
I mounted Amp and crossovers and ran wires to interior for connection
to the stereo. |
 |
 |
 |
 |
|
Here are some custom stuff we did on the 355's. 1st pic is the LT-1 looking amp rack in a 355. When at knotts we were telling everyone it had dual engines (front and rear). |
|
 |
 |
Links: |
| Diamond Audio |
Termpro.com - Audio Forum web site |
| Alpine - Audio Systems and Navigation |
 |
This entire Website
is copyright © 2002-2005 by Ron
Fletcher. All rights reserved. |
Although my information
comes from various builders and sources, if you want any information contact
me. The photographs used on this site are used with permission, if you
want to use any, contact them through the various links on this site.
I did and you can see the results! |