This is a 95 VT the white ligths in the center grils area are the reverse lights, there are two red reflectors as well on the bumper.

Below, this Diablo has the back-up lights located in the rear bumper.

Fletch

The rear back-up lights that came with my CRP kit are from a Mitsubishi part number MB597781 (I believe that are from a 93 Eclipse)... because CRP gave me these lights, this doen't mean that they are the right lights to install.

There is a lot of great information on Jason Jones's web site - (click on his logo to visit his web site)

Dale Van Blokland

I decided to use the newer style bumper that has the reflector and the backup lights. This meant modifying the existing bumper.

I built metal boxes to enclose the backup lights and the rear reflector light out of 1/8" x 2" flat bar. I welded tabs on the outside of the boxes and countersunk screws to hold the boxes in place. I cut out the openings for the boxes. I used the material from the cutout to fill in the existing light area on the bumper. After connecting the wires I mounted the lights in the bumper and filled in the area with bondo.