ChassisElectricalFrontRearBodyInteriorNotes
Rear - License Plate Mounting Base

 

A real Lamborghini This is a photo of a Lamborghini Diablo 6.0 license plate mounting base piece (the part behind the license plate).

 

 

Fletch

I just received my Lamborghini Diablo License Plate Box from Steve Curtis. I ordered a normal box, but Steve was kind enough to send me a Carbon Fiber box (a customer backed out of an order and he sent me this one).

Check out the photos of this box, as far as I know, Steve is the only place where you can get this box.
Steve wrote me with this - The part will come to life once you wetsand and polish it. You won't even recognize it as it will have a deep luster. If you don't have a good buffer you can get an expensive one for around $250.00 from Milwaukee that has a variable speed or I recently picked up as second one from NAPA that cost $45.00 that had the variable speed and worked just as well. Let the guys know what you are doing and they should be able to tell you the best 3m compounds to use. It should be a 2 step process. Also ask them for the best polishing and buffing pads as that is very important. Make sure you get a variable speed unit so you can turn down the RPMs so you don't burn through the clear. Steve Curtis

 

This entire web site is Copyright © 2002- www.lambolounge.com by Ron Fletcher. All rights reserved.

Although my information comes from various builders and sources, if you want any information contact me. The photographs used on this site are used with permission, if you want to use any, contact them through the various links on this site. I did and you can see the results!