There is a detailed "manual" that Dale has created for you to view (in regards to this section). This instruction manual is on how he built his IFG Phantom Roadster. (click on his logo to visit his web site)

Click here to visit Dale's section on: Chapter 23 - Wiring

Dale Van Blokland
When I made the decision to use real lamborghini lights, I didn't know what would be involved in hooking them up. IFG uses the normal Fiero holders and their lenses. The Fiero has more lights than Lamborghini. The Chilton's wiring diagram is very good. However, when the brakes were applied, the amber lenses for the turn signals were also illuminated. It was necessary to add a seperate relay for the brakes. I am working on the drawing and I will post it when completed. I used a 6 socket Painless connector, 2 for turn signal and three for tail/brake lights. I spent about 2 days before I finally figured out that I had a bad relay. I replaced both of them with new ones