![]() |
![]() |
![]() |
|||||||
|
|||||||||
| Rear - Trunk / Exhaust Cover - Deck Lid |
| A real Lamborghini | |
|
|
| This is a IFG kit car that was for sale on e-bay |
![]() |
![]() |
![]() |
|
These are photos of the deck lid as I received it from CRP. The bottom side is NOT finished. |
|
![]() |
![]() |
| You can see how thin the fiber glass is, there is a inconstancy in thickness with this part. | |
![]() |
|
| Here are some photos of how this deck lid DOES NOT match the contour lines of the engine cover (deck lid) | |
![]() |
![]() |
![]() |
![]() |
|
Trunk lid from CRP |
![]() |
![]() |
|
The real deal - This is my dads 1991 Diablo, with the optional 100bhp
upgrade (210mph). This photo was taken after I removed all the moulds.
|
![]() |
Exhaust cover (REMOVED)
|
Underside of exhaust cover
|
Exhaust cover flanged - This shows the flanges fitted, ready to lay-up
the mould.
|
Nearly forgot to remove badge
|
No going back now - The exhaust cover has been applied with release wax, gelcoat and csm. Note ribs have been added to ensure mould retains correct shape.
|
First exhaust cover out of mould
|
This entire Website
is copyright © 2002-2005 by Ron
Fletcher. All rights reserved. |
Although my information
comes from various builders and sources, if you want any information contact
me. The photographs used on this site are used with permission, if you
want to use any, contact them through the various links on this site.
I did and you can see the results! |